Protektor Model front bag holder for Caldwell Rock BR

cults3d

This is a bracket consisting of a base and two clamping and holding bars to install a Protektor Model® brand front bag on the head of the Caldwell Rock BR® shooting tripod. Uses the original hardware consisting of the original 4 screws. Requires the following additional screws: 8 brass threaded inserts M3*5-4.2 (5mm high - 4.2mm outer diameter). https://fr.aliexpress.com/item/32848289321.html 8 screws M3*16 stainless steel A2 DIN 912 (16 mm long - hexagon socket head) Insert the brass threaded inserts on the base below. Use an M3 screw to force them in (don't force too much). Install the base with the 4 original screws. Position the bag. Install the clamping bars on the leather tabs of the Protektor Model bag and screw in the M3*16 screws gently, spreading the clamping. Pull a little on the leather tabs to stabilize the front bag and finish tightening (do not tighten all the way considering the thickness of the leather tabs). This is a support consisting of a base and two clamping and holding bars to install a Protektor Model® brand front bag on the head of the Caldwell Rock BR® shooting tripod. Uses the original hardware consisting of the 4 original screws. Requires the following additional hardware: 8 brass threaded inserts nuts M3*5-4.2 (5mm high - 4.2mm external diameter). https://en.aliexpress.com/item/32848289321.html 8 screws M3*16 stainless steel A2 DIN 912 (16 mm long - cylindrical head with hexagon socket) Insert the threaded brass inserts nuts on the base underneath. Use an M3 screw to force them in (do not force them too much). Install the base with the 4 original screws. Position the bag. Install the clamping bars on the leather tabs of the Protektor Model bag and screw the M3*16 screws gently, distributing the tightening. Pull a little on the leather tabs to stabilize the front bag and finish tightening (do not tighten fully given the thickness of the leather tabs).