Protective Goggles (Foldable)

prusaprinters

<p>The foldable protective goggles were designed to help medical workers who are at risk of getting infected with the SARS-CoV-2 virus that causes the COVID-19 disease. It presents an alternative to face shields.</p> <p>This model is printed in one piece including foldable arms. There is only need to add a transparent PVC sheet (up to 0,4mm thickness).</p> <p><b>1. Frame of the goggles</b><br/> The frame can be printed out of PLA, and PETG. For more flexibility and durability we recommend using PETG.</p> <p><b>2. Plastic shield</b><br/> The shield needs to be cut according to a template, which is included in the files. Template can be printed by 3D printed or printed on a A4 sheet. Shield is held in place due to small gap in plastic frame. If the shield is too loose in the frame, You can fix it with a drop of superglue. You can adjust the nose cut out to suit your needs.<br/> Link for <a href="https://drive.google.com/open?id=1ySXnnyeSGaVrhZNwriPGxl4FWbVml0Nk">Shield Template in PDF format.</a></p> <p><h3>IMPORTANT NOTICE!!!</h3><br/> <b>THESE GOGGLES DO NOT PROVIDE ENOUGH PROTECTION WHILE WORKING WITH POWER TOOLS!!! THEY ARE INTENDED TO REDUCE THE RISK OF GETTING THE COVID-19 DISEASE.</b></p> <p><p></p></p> <p><p></p><br/> This project was realised by the <b>Faculty of Mechanical Engineering, Slovak University of Technology in Bratislava</b> to help fighting COVID-19.</p> <h3>Print instructions</h3><p>Material: PLA/PETG<br/> Layer height: 0.2mm<br/> Perimeters: 3<br/> Infill: 30% or more<br/> Supports: Not needed, but can be used for getting better overhangs on foldable arms.</p>