Project box customizer with lid

thingiverse

This is a project box customizer using OpenSCAD. I've added cutouts for wire access or port access. To access the port cutout definitions, click on the hyperlink title with a down arrow at the top left of the Customizer page for this thing. As of November 12th, 2018, the defaults are set for the Raspberry Pi 3+. <b>Updated November 12th, 2018 to version 1.4</b> I've fixed a bug on posts. <b>Updated February 14th, 2018 to version 1.3</b> I've fixed a bug on post #3. Now supports chamfered edges (split out to a new SCAD program since it takes longer). <i>Note: Only one SCAD customizer is supported, so just download the chamfer version.</i> The defaults should work for an Odroid-C2 or Raspberry PI but only one cutout is supported per sidewall. Make sure the cutout is large enough to open up all devices and wires you need on each sidewall. <i>Note: Supports cutouts on each of the 4 side-walls and optional vents on top and bottom plates.</i> <u>Updates</u> <b>Updated SCAD and STL file: January 13, 2018 to provide vent holes in top and bottom plates</b> The PCB posts are optional. If you choose to do them, measure them from the closest sidewall to the center of the post. This way, you can measure the PCB to hole and use that measurement for both x and y. The post ordering is clockwise from the closest to the origin.