Project Aegis (Blackbeard shield)

prusaprinters

3d model mount is modified from https://www.thingiverse.com/thing:3220747original template and instructions from https://app.photobucket.com/u/HUNminator/a/821b0631-5570-48bb-853c-b84532688ed2I'm not the original owner of the template nor the model files, I just compiled them for easy access for whoever wants to make one instead of buying one. Let's see those shields! things needed:2mm polycarbonate/plexiglass sheet (sizing is up to you, i used A3 size, then fitted it diagonally)1x M3x30mm nut and bolt2x M4 screwspaper (not a must, but definitely helpful)rubber-gasket-bumper-whatever-this-is or similar (Simplified) Instructions:print the template on paper/freehand it on the polycarb sheet lmao(size it accordingly)cut the shield out from the sheetheat and bend it along the vertical lines in the red-lined template (I did 300degC on heat gun, but 200 is good and slow)(try not to “overcook”, bubbles will appear!)print the things, mark holes on the shield to drill, and drill holesUse M4 screws to attach shield to mountUse M3 nut and bolt for the picatinny clampRubber-gasket-thing to go around the perimeter of the shield, no ouchiesmount on blaster, go pew pew, throw the whole blaster away if shield is destroyedMore detailed instructions are in the resources, check them out!