PrintrBot Z Axis holder for IKEA LEDBERG with Filament Guide

youmagine

Z-Axis filament holder designed specifically for PrintrBot Simple Metal, augmented by additional support on the opposite side to accommodate IKEA's LEDBERG LED strip-light set. This DIY project consists of four distinct parts, with STL files provided for the first three components: 1. The Z-Axis arm features a 3mm hole at its terminus, allowing users to secure it with a screw that holds the rod in place. 2. The LED holder is engineered to support all three LED strips without issue. 3. A custom-designed LED connector, not available from IKEA or included with the purchase, plays a crucial role in the assembly process. For detailed instructions on how to assemble this project, please visit http://www.thingiverse.com/thing:6490514. When selecting the rod for this project, look for one measuring approximately 40cm in length and boasting a diameter of 15-20mm. If the chosen rod is too wide, users can simply trim down the section held by both the Z-Axis arm (15mm) and the LED holder (20mm). Assembly instructions follow: 1. Position the rod correctly. 2. Secure the rod and screw in place using a suitable fastener. 3. Mount the LED strips into the dedicated holder. 4. Connect the LED strips with custom-designed connectors. 5. Attach the completed LED unit to the opposite end of the rod. 6. Utilize cable twists or ties to secure the power wire along the length of the rod, keeping it neatly organized throughout the assembly process.