Printrbot Simple Metal Tentacle Fan Shroud

thingiverse

A fan shroud for your Simple Metal from the Deep Sea. This fan shroud divides air flow from a radial fan into three separate tubes, then redistributes it evenly around the hot end's tip to provide all-around cooling and improved print quality. Unlike other fan shrouds that offer comprehensive cooling, this Tentacle Fan Shroud provides optimal cooling without severely restricting access to the hot end. It was designed specifically for the Ubis 13s hot end; therefore, it also works well with the Ceramic Ubis hot end since its diameter near the nozzle is smaller than that of the Ubis 13s hot end. Inspired by jerryroane's "Printrbot fan ducts into three streams" http://www.thingiverse.com/thing:1397974 IMPORTANT! Disable thin wall detection capabilities for best results. Print Settings Printer Brand: Printer: Printrbot Simple Black Infill: 20 Notes: Disable thin wall detection capabilities for best results. 2 Perimeters Maximum Post-Printing Mounting This fan shroud was designed to be mounted on the Printrbot simple metal with the actual fan attached to the outer part of the frame. Ensure your fan is installed accordingly so that the shroud aligns properly.