Printrbot Simple Bed Extension
thingiverse
Extend your Printrbot Simple's print bed width from 100mm to 140mm, a 40% increase. Ensure holes are drilled and tapped with #6-32 tap set. Use 3/4" x 1/2" angle aluminum for the front brace, and 3/4" x 1/16" for rear. A tensioner with two springs (one inside other) is required for drive line. Replace the drive line cord with Spectra over Kevlar due to its durability. You'll need 2x 330mm x 8mm smooth rods, 5x #6-32 x 3/4" screws, 4x #6-32 x 1/2" screws, and 3x #6-32 x 3/8" screws with 12 washers for mounting. Remember to rotate parts 45 degrees while printing on Printrbot Simple. To update the bed size, run M211 X140 Y100 Z115, then M500 and confirm new settings using M501 command.
With this file you will be able to print Printrbot Simple Bed Extension with your 3D printer. Click on the button and save the file on your computer to work, edit or customize your design. You can also find more 3D designs for printers on Printrbot Simple Bed Extension.