Printrbot Play Replacement Cover

prusaprinters

<p>Remix of this design here: <a href="https://www.youmagine.com/designs/printrbot-play-integrated-fan-mounting-frame">https://www.youmagine.com/designs/printrbot-play-integrated-fan-mounting-frame</a></p> <p>I edited this to accommodate a better individual fan shroud on the bottom fan which directed airflow better. I also opened up the front more to allow even more visibility for timelapses, general viewing, etc. I added a small hole next to the LED mount for those looking to feed an LED in from the outside of the shroud instead of the inside.</p> <p>The smaller fan shroud I used on my system, which you can see in the image, is this one here: <a href="https://www.thingiverse.com/thing:1255573">http://www.thingiverse.com/thing:1255573</a></p> <h3>Print Settings</h3> <p><strong>Printer Brand:</strong></p> <p>Printrbot</p> <p class="detail-setting printer"><strong>Printer: </strong> <div><p>Simple White</p></div> <p><strong>Rafts:</strong></p> <p>No</p> <p class="detail-setting supports"><strong>Supports: </strong> <div><p>No</p></div> <p><strong>Resolution:</strong></p> <p>0.2mm</p> <p class="detail-setting infill"><strong>Infill: </strong> <div><p>100%</p></div> <p><strong>Notes:</strong></p> <p>I have a heated bed, so you may need a raft.</p> <p>I set my bed to 70 degrees to ensure there wouldn't be any warping, and also left the bottom fan off for the first 4 layers. Then I set it to 100% for the rest of the print.</p> <h3>How I Designed This</h3> <p>This was a previous design from Almond Lee, located here: <a href="https://www.youmagine.com/designs/printrbot-play-integrated-fan-mounting-frame">https://www.youmagine.com/designs/printrbot-play-integrated-fan-mounting-frame</a></p> <p>I used TinkerCAD to edit the STL and remove material in the places I needed to open up.</p> </p></p></p> Category: 3D Printer Parts