Printrbot 1405 XL-Tower Printable STL Version

thingiverse

Complete Printrbot XL Tower for Maker's Edition Simple Upgrade Converted from the original laser-cut DXF to printable, water-tight STL files. I bought my XL-Tower the day they released it - an earlier version did not include the tower-top Spool Holder, so I converted the entire pattern so you can print the parts you need or even customize it. Printrbot released lasercut DXF drawing file, but we needed to convert STL to print any of those parts. The originals were not water-tight drawings into printable STL, so they had to be drawn from scratch. The original DXF is found at https://www.youmagine.com/designs/printrbot-simple-xl-upgrade-with-spool-rack. These are drawn specifically for printing; all tabs are drawn slightly smaller than the holes they fit into. It is a nice, tight fit - first layer squish may have to be filed off to fit. Screw and nuts were drawn for original 3mm hardware to be used. I had no problem fitting parts that are printed at 2 perimeters with a 0.4mm nozzle and .25 mm layer height (30% infill before perimeters). If you use three or heavy layers, you may need to edit the files or do some drilling and sanding to fit the parts. Pieces thickness were rendered at 5.6 mm thick. They fit nicely with Printrbot's original six millimeter wood. The largest piece (left wall) requires a print area of 338mm x 142mm. I added the "10x15.STL" file which contains ten pieces of "15.STL", required to build this kit, If you use it, I didn't upload "15.STL" file; so, print one of each STL files still remaining. If you need assembly instructions or a list of the required hardware, check Printrbot's site: http://help.printrbot.com/c/2014_Printrbot_simple.