PrintNC HGW20 to HGH20CA Adapter
thingiverse
The printnc uses HGW20 carriages. My rail supplier shipped only HGH20CA carriages. Thats the reason for this adapter. In my case I used transparent PETG with 10% infill. The option "Infill where needed" in the prusa slicer has been enabled and the top layer removed. Epoxy granite is used to fill the whole molde in a later process. For PETG only prints I recommend 3 or 4 Perimeter and 20-50% Infill. 1. Install 4x M5/M6 x16mm from the adapter to the Y roller. Dont install the roller yet. 2. Install 4x M5 x12mm button head screws to the opposite site and screw the HGH20CA carriage tight. 3. Install now the Y roller beam There is a version for 80mm beams and 70mm. Included to the package is a higher BF12, BK12 and NEMA23 mount. The NEMA23 mount has a longer end and can be installed with 3x M6 bolts.
With this file you will be able to print PrintNC HGW20 to HGH20CA Adapter with your 3D printer. Click on the button and save the file on your computer to work, edit or customize your design. You can also find more 3D designs for printers on PrintNC HGW20 to HGH20CA Adapter.