Printed TPU Feet for Voron 2.4
prusaprinters
<h3>Printed TPU Feet for Voron 2.4 / 2.4r1</h3><h4><strong>This is not compatible with V2.4r2</strong></h4><p>I'm not a fan of the looking of compressor rubber feet, but still too lazy to switch the Z drives and skirts to V2.4r2. So I made these printed feet with a low-poly Stealthburner-ish look. </p><ul><li>You can print the foot in TPU, or print the bottom 4mm with ABS and do a filament swap so the M5 screw is pressed against hard material.</li><li>The base_plate is optional. But the foot can rotate on flat surface so the base_plate has a cut-out to lock the TPU foot.</li><li>The TPU foot will hold the m3 screws from falling out but keep the hex holes accessible so you can take the base_plate off without removing the TPU foot.</li><li>I printed with TPU 95A at 4 perimeters 30% gyroid infill and it's quite stiff. You can adjust the settings base on your liking.</li></ul>
With this file you will be able to print Printed TPU Feet for Voron 2.4 with your 3D printer. Click on the button and save the file on your computer to work, edit or customize your design. You can also find more 3D designs for printers on Printed TPU Feet for Voron 2.4.