Printable walls for enclosure expansion.

prusaprinters

<p>≤==== I WILL UPDATE THIS DESCRIPTION AND PHOTOS LATER ======&gt;<br><br>I was in self-isolation and couldn't get wood, so I designed and printed these walls for the lack enclosure expansion.&nbsp;<br><br>They have slots for passing wires around the enclosure.</p><p>One wall has a hole in it that is designed to couple inside the blower fan on a filtered ventilation hack based on a 24V blower fan and a 6003 respirator filter cartridge.&nbsp;<br><a href="https://www.thingiverse.com/thing:3331276">https://www.thingiverse.com/thing:3331276</a></p><p>If you are printing this thing on a Mini, you will need to slice the top 2mm off with your slicer and print that as a separate part. I found these 2mm slices useful for adjusting fitment to accommodate the wonkyness of my Lack setup.&nbsp;<br><br>Printed in PETG with generic settings, there are holes for nuts, bolts and washers, but I would superglue these to your PETG risers.&nbsp;<br>&nbsp;</p><p>A good addition to this would be a little locating lug to go in the screw holes.&nbsp;</p><p>The three box sections should be glued together with the adjoining inserts. Note, the top and bottom edges of the insert will meet, but the sides will bow, so only glue the top and bottom.<br>&nbsp;</p><p>The wall thickness is such that you can print as 2 perimeters with a 0.6mm nozzle.</p><p>&nbsp;</p>