PrinTable Mushroom Lamp

prusaprinters

This is a design I created few years ago but that I've never published yet. The contest made me remember about it so there it is, I hope you'll like it. When I made it, I used a wooden coaster to build the base so I also designed a fully printable one if you want to make it simple. The base hold with five M2 screws and is removable.For the light, I used a 12V tiny LED light bulb but I recommend you to use an LED strip inside instead. You can also use RGB leds like a Philips Hue strip or other to make it look even better! Printing Settings :Infill: 10 - 20%Layer height: 0.2 or moreThe files are already oriented and ready to sliceSupport: Only on for the mushroom cap (File 1)Materials for the mushroom : Transparent PLA, PETG or PVB (be aware of the light heat) Assembly  InstructionsPrint the file 1 and 2 and assemble themIf you plan to use a LED strip, print the file 3A - Base.If you plan to use a 12V light bulb like I did, print the parts 3B1 and 3B2.Add your light inside de mushroom, passing the cables though the base.Screw five M2 screws or glue nails at the bottom of the mushroom.Put the mushroom on the base and twist it to lock it. Please tell me if you have some questions to ask or if you want me to add some changes to the design. Have fun!