Printable A320 Throttle Quadrant
cults3d
The first fully working and printable A320 Throttle Quadrant, for your favourite simulator! The quality you loved in the 737 TQ now gets even better with an rock solid design and increased realism. This model can be easily printed with any 3D printer that has a build plate of, at least, 220X200mm. All the buttons and the levers you see in the photos are actually working. Detents are present for REV/IDLE/CL/FLX and TOGA points, in addiction the REV sector cannot be engaged if the handles are not lifted (as in a real A320). Flaps and Spoiler levers can be attached to the main body for a more compact assembly or they can be placed anywhere in your cockpit with the extended plates provided. Assembly is super easy too, with the instruction provided, all you have to do is: print all the files, follow very carefully the instruction, connect the potentiometer and buttons and fly. You will need: 4x Linear Rotational Potentiometers 2x Red Buttons 2x Roller Lever Actuator Switches (Optionals and depend on your software) 1x Rotary Selector Switch 2x Toggle Switches Some Springs 4x Ball Bearings 608 2x Ball Plungers (optionals, needed for detents) 1x Joystick USB Interface 1:1 Scale. Dimensions are the following: •255X293X284 WXLXH, measurements are done with Flap and Spoilers attached and THR levers in vertical position. •105X293X284 WXLXH, measurements are done without Flap and Spoilers attached and THR levers in vertical position. •145X102X5 WXLXH are the dimensions of the extended Flaps/Spoilers plate.
With this file you will be able to print Printable A320 Throttle Quadrant with your 3D printer. Click on the button and save the file on your computer to work, edit or customize your design. You can also find more 3D designs for printers on Printable A320 Throttle Quadrant.