Print-in-place Toy Railroad Gate

prusaprinters

<p>Print-in-place simple railroad crossing gate I threw together in TinkerCAD.</p> <p>It's not designed to any scale, but it's small enough that it works with Hot Wheels, Brio, Duplo, Lego; pretty much any small-sized toy set.</p> <p>If you'd like to remix the project, feel free to copy my original model:</p> <p><a href="https://www.tinkercad.com/things/6IKkoSalzJN-railroad-crossing-gate">https://www.tinkercad.com/things/6IKkoSalzJN-railroad-crossing-gate</a></p> <h3> Print Settings</h3> <p><strong>Printer:</strong></p> <p>Artillery Genius</p> <p><p class="detail-setting rafts"><strong>Rafts: </strong> <div><p>Yes</p></div><strong>Supports:</strong></p> <p>No</p> <p><p class="detail-setting resolution"><strong>Resolution: </strong> <div><p>.2mm</p></div><strong>Infill:</strong></p> <p>20%</p> <p><strong>Filament:</strong> Overture PLA Black <br/> <p class="detail-setting notes"><strong>Notes: </strong> </p><div><p>When printing, be sure to place the gate surface on the bed, as illustrated in the picture. The gate arm has a rounded end and a flat end at the pivot: the flat side of the model should be placed down. </p> If your printer has issues with elephant's foot or the first layer width being too squished, I would recommend using a raft. No supports are needed.</div></p> <p>The base can be attached to the gate arm assembly with superglue or your adhesive of choice.</p> <p>Recommend to print 0.2mm or higher resolution.</p> </p></p> Category: Buildings &amp; Structures