print in place retractable / foldable / collapsible Harry Potter magic wand

thingiverse

Welcome back witches and wizards! I redesigned my collapsing wand, now its just print in place! Watch this short video for printing: <iframe width="384" height="629" src="https://www.youtube.com/embed/Fggek6OkET4" title="3d printed print in place collapsible magic wand design #harrypotter #hogwartslegacy #3dprinting" frameborder="0" allow="accelerometer; autoplay; clipboard-write; encrypted-media; gyroscope; picture-in-picture; web-share" allowfullscreen></iframe> other versions: <iframe width="384" height="629" src="https://www.youtube.com/embed/7yjV3M3Tyo0" title="I designed and 3d printed a collapsible magic Harry potter wand #3dprinting #harrypotter" frameborder="0" allow="accelerometer; autoplay; clipboard-write; encrypted-media; gyroscope; picture-in-picture; web-share" allowfullscreen></iframe> Just print it as shown in the video with 20% infill, **NO SUPPORTS, NO RAFTS**. **ONE IMPORTANT SETTING IN CURA:** I use cura as a slicer, I had to put my **HORIZONTAL EXTENSION to -0.1**, for the telescope parts, so thes CONSIST ONLY OF 2 LAYER LINES beside each other. This may also print without this setting, but it worked great for me. Make also sure NOT to use supports for all the parts. The rest was just printed with 0.2mm Layer height and 20% infill. **Watch also my other design for this wand which comes in seperated pieces so you can mix up colors:** [https://www.thingiverse.com/thing:5881441/](https://www.thingiverse.com/thing:5881441/) **UPDATE** I updated a version 2.0: slightly more space between the inner pieces and the handle, because some of you had problems with sticking inner pieces to the handle AND solid smallest inner piece so it wont break that fast. Versions 3.0 - 5.0 Some handle variations. **Let me know if there are print issues. If you want to support me, consider liking, subscribing & commenting on my video / youtube channel**