Print in place Bell Ball Ornament
prusaprinters
<p>I wanted to see if I was able to design a print in place for resin printer, this seemed the right time to check.</p><p>I've come up with this design. It is a simple ball with a bell inside, the bell and the clapper can move freely after the support removal, so unfortunately, no fancy mechanism.</p><p>The pre supported version is 66% the raw version as I was low on resin and wanted to test it.</p><p>Support removal was not as bad as it seems, just be careful on the parts inside.</p><p>I printed the file with Halot Lite, resin is translucent green, maybe an abs like would be better.</p><p>Layer height: 0,05 mm</p><p>Bottom exposure: 35 s</p><p>Number of bottom layer: 5</p><p>Normal Exposure 1,8 s</p><p>Motor speed 1 mm/s (it is really low, but I just didn't want it to fail)</p><p> </p>
With this file you will be able to print Print in place Bell Ball Ornament with your 3D printer. Click on the button and save the file on your computer to work, edit or customize your design. You can also find more 3D designs for printers on Print in place Bell Ball Ornament.