
Print Head Fan Holder for Geeetech A10
thingiverse
# Summary This Print Head Fan Holder is designed for Geeetech A10 printers. The front fan has been replaced, and a side extractor has been added. # Print Settings 1 x PrintHeadFanHolder: Layer: 0.15mm Raft: no Support: yes Infill: 100% 1 x PrintHeadFanDuct: Layer: 0.15mm Raft: no Support: no Infill: 100% # Accessories 2 x m2x15mm SHCS (use existing) for the fan duct 2 x m3x16mm SHCS for the side extractor 2 x m4x20mm SHCS for the front fan Front Fan: https://www.amazon.com/dp/B07K6GKH26/ref=sspa_dk_detail_0?keywords=fan&qid=1643723149&sr=8-1 Side Extractor: https://www.amazon.com/dp/B07CV6VTWB/ref=sspa_dk_detail_2?keywords=extractor&qid=1643723157&sr=8-2 Dupont Cables: https://www.amazon.com/dp/B01JD5WCG2/ref=sr_1_4?keywords=dupont+cables+24v&qid=1643723173&s=hi&qid=1643723173&rps=1 # Mounting The fan cables are connected by Dupont connectors for easy assembly and disassembly. If necessary, cut the hotend cage's right side to pass wires. Mount PrintHeadFanHolder on the hotend cage. Connect front fan wires with Dupont connectors through the hole provided, being careful of polarity. Fix the front fan with two m4 screws. The side extractor connects to the 24V port available on the back of the hotend (see picture). Connect side extractor wires to PrintHeadFanHolder with two m3 screws. Mount PrintHeadFanDuct on PrintHeadFanHolder using original m2 screws. Note: The side extractor is always on.
With this file you will be able to print Print Head Fan Holder for Geeetech A10 with your 3D printer. Click on the button and save the file on your computer to work, edit or customize your design. You can also find more 3D designs for printers on Print Head Fan Holder for Geeetech A10 .