Print BOT

thingiverse

Human: PL:\nInspired by the sphere o-bot from jjrobots and egg-bot (open source), a printer robot has been created. The modifications made allow for printing on various objects such as ping-pong balls, eggs, small and large balls up to 11cm in diameter. A height-adjustable shoulder pen and a spring-loaded pen connected to the server have also been added. The entire system is based on ARDUINO LEONARDO, with printed PLA housing and mounting components at 210st.C temperature. Large items are printed with a layer height of 0.3mm, while small items require a 0.2mm layer height. For large objects, the infill ratio is set to 20%, while for pressing elements and small parts it's 50%. More detailed information can be found on http://jjrobots.com/sphere-o-bot-assembly-and-user-guide/. The housing design was created by the author themselves.\nEN:\nA printer robot has been inspired by the sphere o-bot from jjrobots and egg-bot (open source). Modifications were made to allow printing on: ping-pong balls, eggs, large and small balls up to 11cm in diameter. A height-adjustable shoulder pen and a spring-loaded pen connected to the server have also been added. The system is based on ARDUINO LEONARDO, with printed PLA housing and mounting components at 210st.C temperature. Large items are printed with a layer height of 0.3mm, while small items require a 0.2mm layer height. For large objects, the infill ratio is set to 20%, while for pressing elements and small parts it's 50%. More detailed information can be found on http://jjrobots.com/sphere-o-bot-assembly-and-user-guide/. The housing design was created by the author themselves.\nPrint Settings\nPrinter Brand: \n RepRap\n \n Printer: \n SPECTRUM START BASIC and PRO (2printers)\n \n Rafts: \n No\n \n Supports: \n Yes\n \n Resolution: \n 0,3 and 0,2 mm\n \n Infill: \n 20% and 50%