Print 3D Channel Maker Coin

thingiverse

The Print 3D Channel proudly introduces the Maker Coin, a creation born from our in-house design studio. Crafted using Cinema 4D, this coin was brought to life through a meticulous printing process on the gCreate gMax 1.5XT+, which utilized multiple colors of MatterHackers PRO PLA filament in a single extruder setup with seamless filament changes. Printer: The gCreate gMax 1.5XT+ proved itself to be an ideal machine for this project, delivering high-quality prints with precision and speed. Filament: Multiple colors of MatterHackers PRO PLA 1.75mm were used, providing a vibrant and visually striking appearance to the Maker Coin. Temps: Printing temperatures were carefully set at 200c, ensuring optimal results from the filament. Layer Height: A layer height of .16mm was chosen for this print, allowing for crisp details and smooth surfaces. Perimeters: Three perimeters were printed around each layer, providing a solid foundation for the coin's structure. Top/Bottom Layers: The top and bottom layers received special attention, with five and three layers respectively being applied to create a robust base and a visually appealing finish. Infill: Seventeen percent infill density was achieved through careful calibration of the printer settings. Support: No support material was required for this print, allowing the Maker Coin to take its final form without any hindrances. Scale: The entire coin was printed at 100% scale, ensuring that every detail and feature was accurately replicated. Print Time: A total print time of one hour and forty-eight minutes was achieved, a testament to the efficiency of our printing setup.