Precision Test

thingiverse

I needed a calibration test to verify my internal settings and dimensions were correct. All measurements are in millimeters. Approximations of print time were made using Cura with the CR-10S Pro profile, a layer height of 0.2 mm, and a speed of 50 mm/s. Precision Test STL = largest one, weighing 40-60 grams, measuring 200x120 mm, taking approximately six hours to print; I recommend printing this first and keeping it as a reference guide. Precision Test Fast Print STL = smaller one, weighing 10-20 grams, measuring 200x100 mm, taking two hours to print, with no text. Precision Test No Base STL = without base, weighing four grams, featuring all loose profiles, taking 25 minutes to print. Precision Test No Base with Ruler STL = without base, weighing four grams, featuring all loose profiles and a 200x120 ruler, taking 28 minutes to print. All other test files are loose profiles; if you want to print just one, that's fine. Edit: I made a small error on text and wall thickness; it was supposed to be 1 mm walls with 2 mm extra on each profile, but I added 4 mm walls to most of them. The error has been corrected in Precision Test V2 STL. Edit 2: If anyone wants the original project with just 1 mm wall, please ask and I'll include it here. Edit 3: Also, all names on loose profiles are incorrect; 15/17 will be changed to 15/19 and 5/7 will be changed to 5/9. I'll try to fix this later.