Precision Piezo Orion Mount for Tevo Little Monster

thingiverse

I finally got fed up with BL-Touch pin drops, inconsistencies, and that bent pin! I decided to dig into piezo bed leveling. I picked up an Orion Precision Piezo PCB. The journey didn't go quite as smoothly as I was hoping; mostly self-inflicted design flaws of my custom brackets since I wanted to use as much of the stock components as possible (e.g., fans, effector, etc.). I also didn't want to use a PTC fitting. ### 2019-02-18 I realized I accidentally removed the fan shroud adapter. ### 2019-01-13 I added the latest v15 tops and removed the excess ones including the twist top. The conical inside increased to help dampen the noise considerably which is something I was running into with previous versions. I also added Orion_Groove_Clamp_3-NUTS-v2.stl that uses M3 nuts instead of brass inserts for those who don't have them readily available. Keep in mind, they are not better than brass inserts, just an alternative I used since the inserts I purchased were too big and wouldn't fit next to each other in one place. ### 2018-11-28 I added Orion_Groove-TLM_Top-v9-PTC-Insert.stl for those who would like to use embedded collets. I personally am trying this model now since the inside walls are too smooth on the SLA prints to hold the tubing on the main model design. I can get it to work if I slip some sandpaper around the tubing for grip, but some of the "sand" falls in - not good. ### 2018-11-22 I uploaded v9 versions that clean up the model (from Tinkercad to Fusion360) and offer deeper wells for the threaded nuts. ### 2018-11-04 I added the following, per request: Orion_Groove-TLM_Top-v5-M10 - threaded top for M10 PTC fitting Orion_Groove-TLM_Top-v5-Original - simply the top of the original PP mount on the TLM mount Orion_Groove-TLM_Top-v5-Retainer - like the original PP mount, but modified without the groove on the groove mount and taller.