Power Supply Switch Closure Tevo Tarantula

thingiverse

Power Supply Closure with On/Off Rocker Switch Installation Guide: To complete this project, you'll need the following parts: 2 Power supply mounts from Neo_sahara's design (https://www.thingiverse.com/thing:2235752) In addition to these required parts, you will also need: 1 Red-illuminated rocker switch from MCM (http://www.newark.com/mcm/26-745/rocker-switches-red-illuminated/dp/38C8818?ost=26-745&scope=partnumberlookahead&exaMfpn=true&searchref=searchlookahead&ddkey=http%3Aen-US%2FElement14_US%2Fw%2Fsearch) 2 20mm long bolts for attaching power supply to bottom mount To assemble the Power Supply Closure, follow these steps: Mount the Power supply mounts to a vertical rail. Insert the rocker switch into the closure. Route the power cords through the opening at the bottom of the closure and connect them according to manufacturer instructions. Attach the power supply to the mounts using 20mm bolts on the bottom mount. Remove the small screw in the top front of the power supply, then save it for attaching the top of the closure. Slide the closure onto the 20mm bolts, ensuring that it clips into place at the front. Replace the small screw from step 7 to secure the closure.