Power Flow Indicator rev c

Power Flow Indicator rev c

thingiverse

Power Flow Indicator rev d for enhanced heat dissipation from computer or Laser system Note: increase O-ring diameter on cover Instructions Flow Indicator One inlet and two outlets need to be threaded with 1/8 NPT pipe threads. -------------------------------------------------------- Do not attempt to print threads on the base for the inlet and outlet; tap them directly! Use a pipe tap at 3 @ 1/8 NPT. Pipe Threads refer to 1/8 NPT Pipe Size, featuring 27 Threads Per Inch: http://www.mcmaster.com/#2525a112/=w6n43r Site Glass can be crafted from clear Acrylic material measuring 1/8 thick Gasket is required between site glass and base; utilize extremely thin Automotive Gasket material. Bolts: Low-Profile Alloy Steel Socket Head Cap Screw Thread: 10-24, Length: 3/4 inch Part Number: 92220A165 ($7.35 per pack of 50): http://www.mcmaster.com/#92220a165/=w61bds Nuts: Low-Strength Steel Hex Nut Part Number: 90480A011 ($1.72 per pack of 100): http://www.mcmaster.com/#90480a011/=w61h4e MIL-Spec. Stainless Steel Threaded Hex-Socket Plug 1/8 Pipe Size Cost: $3.33 Each; Part Number: 1725K12 :http://www.mcmaster.com/#1725k12/=w6206n ---------------------------------Sub Note Threaded Hex-Socket Plug -------------------------------- Print the components and file or tap them; due to acquisition costs being too high During installation, apply Teflon Tape on threads, but not Teflon Paste. Mil. Spec. Oil-Resistant Buna-N O-Ring Dash Number 222 Part Number: 4464T576 ($6.61 per pack of 10):http://www.mcmaster.com/#4464t576/=w63m8k -------------------------------Sub Note on O-Ring---------------------- Visit an Auto Parts store and purchase a larger O-Ring than necessary Cut to size and reassemble using super glue. Assembly Bolts & Nut files have been included as STL, allowing for 4 required components to be printed; however, it is suggested to use steel for a more appealing outcome. Gasket Material: Dimensions 1.45 OD X 1.30 ID Opt for any Light-Duty Gasket Material that is thin Blended Fiber/Buna-N Sheet measuring 1/64 inch thick by 12 inches x 36 inches Cost: $6.00; Part Number: 9556K81 :http://www.mcmaster.com/#9556k81/=w6505s

Download Model from thingiverse

With this file you will be able to print Power Flow Indicator rev c with your 3D printer. Click on the button and save the file on your computer to work, edit or customize your design. You can also find more 3D designs for printers on Power Flow Indicator rev c.