Potentiometer mount for Cycle Analyst V3 (CAV3)
thingiverse
Shameless plug: I directly copied the design from this site:\r\nhttps://ozo-electric.com/en/cycle-analyst/805-support-potentiometre-v3-sur-le-guidon.html\r\n The main reason was simplicity! There's another housing for a CA V3 potentiometer available here on thingiverse: http://www.thingiverse.com/thing:1425715\r\n It tries to mimic the vertical position from the standard poti you can get from Grin:\r\nhttps://www.ebikes.ca/shop/electric-bicycle-parts/ca-accessories/aux-input/ca3-aux-al.html\r\n While the Grin version is cool with the Aluminum mount, I still find it pretty pricey at 25 USD.\r\n Even when getting a Vishay P16 poti with 4.7 kOhm for 10 Euros, you stay well below 15 bucks if you do it yourself. Plus, you can even lower the price more by using a cheaper potentiometer.\r\n There was another German company selling both the potentiometer as well as an aluminum bracket mimicing a similar position for the poti. Somehow they decided to stop selling this stuff.\r\nI designed this thing with a cable hole on both sides to enable people to mount it on both sides of the handlebar. Mounting is done with two zip ties. Over the last few weeks, I have fallen in love with using a potentiometer for adjusting the PAS base power level on the CA. It's both faster and more intuitive than a pair digital buttons. Especially when going to max power shortly prior a hill or steep ramp.\r\n I printed it in PLA with 100% infill, but if you need more strength I would go at least for PETG. Be careful not to wiggle too much when you have attached your poti holder to the handlebar.
With this file you will be able to print Potentiometer mount for Cycle Analyst V3 (CAV3) with your 3D printer. Click on the button and save the file on your computer to work, edit or customize your design. You can also find more 3D designs for printers on Potentiometer mount for Cycle Analyst V3 (CAV3).