Post Sensor Bowden Tube Feed Bracket, AnyCubic Vyper Kobra & Kobra Max

thingiverse

This part is an add on for direct drive conversions on Anycubic Kobra, Kobra Max, or Vyper printers. When you remove the motor from the Kobra Max, there is no place for the filament to feed to after the filament sensor. This part allows you to utilize the old filament feed drive location to mount your bowden tube to. I highly suggest upgrading to a capricorn bowden tube, which comes with the necessary push to connect fitting that is threaded for this part. You can get them on Amazon here: https://www.amazon.com/gp/product/B09GM6W972/ You can download the Vyper, Kobra, Kobra Max direct drive file from ivan_lisi's file here: https://www.thingiverse.com/thing:5193286/comments When you convert to a direct drive, there is no place for your filament to go to after the sensor. This will allow you to mount a bowden tune to the OEM motor location so the filament is supported pre-direct drive. Threads are modeled in the STL file, however you may need to tap them with a M3x0.5 tap. Our was printed on a modified Phrozen Shuffle XL w/ a 4k screen. But a FDM printer will work too. Use M3x0.5x15mm bolts, which is the same as the feed drive motor. If you would like our External Filament Bowden Feed Sensor Bracket, those are listed here: https://www.thingiverse.com/thing:5817145