Position Ring for SparkMaker FHD

myminifactory

Position Ring for SparkMaker FHD================================\r\nThis is an extension for the SparkMaker FHD resin printer.\r\nThe cover of the SparkMaker FHD sits loosely on its base, and this ring provides a stable position.\r\nRequired Parts--------------\r\n- 2x M3x16 countersunk head screws (for right side)- 2x M3x20 countersunk head screws (for left side)\r\nPrinting--------\r\n- Print the ring upside down- Add brim or brim ears to improve bed adhesion, as they enhance print stability- The ring is designed to be printed without support, simplifying the process.\r\nInstallation------------\r\nWARNING: You must open your printer and mount the ring! If you feel uncomfortable with this, just use the screws on the right side.\r\n1. Remove the upper 2 screws of the fan (ventilation holes) on the right sides by taking out the nuts first. 2. Open your printer, following its manual instructions. If you don't want to open your printer, add the ring and skip to the last step!3. Remove the upper 2 screws of the fan (ventilation holes) on the left sides while holding the nuts inside the printer securely.4. Place the ring in position5. Use M3x20 screws and the original nuts to secure the ring on the left side6. Close your printer5. Secure the ring on the right side using M3x16 screws