Posable Android Robot remix

prusaprinters

<p>Remix of an excellent design <a href="https://www.thingiverse.com/thing:525796">https://www.thingiverse.com/thing:525796</a></p> <p>I made body, head and head ring more rounded and adjusted arm pin for tighter fit.<br/> Made it able to print without support and added android logo on the body.</p> <p>See remixes I've added. More remixes on the way...</p> <h3> Print Details</h3> <p>Print objects, amounts and my settings (I used Cubic infill in Cura)</p> <p>1 x body (layer: 0.2, infill: 10%, print upside-down)<br/> 1 x head (layer: 0.15, infill: 20%)<br/> 1 x head ring (layer: 0.3, infill: 0%)<br/> 1 x pair of eyes (layer: 0.15, infill: 10%)<br/> 2 x arm (layer: 0.15, infill: 20%)<br/> 2 x shoulder pin (layer: 0.15, infill: 10%)<br/> 2 x arm pin (layer: 0.15, infill: 20%)<br/> 2 x any combination of hands (layer: 0.15, infill: 20%, print upside-down on the wider flat surface). There are few other hand options in the original thing but I haven't used them.<br/> There are also shoulder rings in the original thing but I haven't used them neither.</p> <p>My printer is not so accurate so I printed big parts with speed 40 mm/s and small parts 25 mm/s. Set speed based on your experience.</p> <h3> Assemble Instructions</h3> <p>There is great assemble video on the original thing page.</p> <p>Please note:</p> <ul> <li>Shoulder pins are bigger than arm pins</li> <li>Shoulder pins have one side wider than the other. The wider side is going into the body</li> <li>The pins have very tight fitting. Use power placing them. I did it many times. Nothing was broken</li> <li>Head ring might need some cleaning/sanding in "arcs" in order to fit on the body</li> <li>Eyes should be glued to the head Any comments/suggestions are welcome.</li> </ul> Category: Toy & Game Accessories