Portable Vacum Cleaner

myminifactory

This Vacum cleaner is designed for operation with a 9V battery, making it portable and easy to carry in your car or office for thorough dust cleaning. The Vacum cleaner features a unique design that prevents sucked-in dust from escaping back into the air once it has been captured. Here's what you'll need: * DC Motor: Faulhaber 2342S006CR 001G 079 (You can purchase this directly from the factory, but any motor with a 23 mm diameter and maximum 65 mm length will work.) * OFF Switch: A simple switch that can be found on eBay at https://www.ebay.it/itm/5pz-PULSANTE-AC-250V-3A-2-Pin-ON-OFF-SPST-Per-Auto-Barca-Rocker-Interruttore/232148194622 * Battery: A 9V battery can be found on eBay at https://www.ebay.it/itm/1X-BATTERIE-PILE-EXTRASTAR-9V-6F22-LUNGA-DURATA-ZINCO-TRANSISTOR/222797474588 * Battery Clip: A snap-on connector cable lead can be found on eBay at https://www.ebay.it/itm/New-10PCS-PP3-MN1604-9V-9-volt-Battery-Holder-Clip-Snap-On-Connector-Cable-Lead/322923049648 * Heat Shrink Tube: A heat shrink tube can be found on eBay at https://www.ebay.it/itm/127PZ-GUAINA-TERMORESTRINGENTE-TERMORETRAIBILE-Heat-Shrink-Tube-2-1-Wrap/122238835459 * Screw (M3 x 16 mm): A screw can be found on eBay at https://www.ebay.it/itm/M3-M4-M5-M6-M8-A2-STAINLESS-HEX-SOCKET-FLANGED-BUTTON-HEAD-ALLEN-BOLTS-SCREWS/321232365051 If you need to make any adjustments, the project files are available in various CAD formats on Thingiverse at https://www.thingiverse.com/thing:2952337. For 3D printing: * Impeller: Use a layer height of 0.2 mm, with 5 perimeters and 25% infill. No support material is needed. * Motor Housing: Use a layer height of 0.3 mm, with 2 perimeters (4 solid top layer) and 10% infill. No support material is required. * Impeller Housing: Use a layer height of 0.3 mm, with 2 perimeters (4 solid top layer) and 10% infill. No support material is needed. * Cone Adaptor: Use a layer height of 0.3 mm, with 5 perimeters and 50% infill. Support material is required. * No Return Hose: Use a layer height of 0.2 mm, with 5 perimeters and 50% infill. No support material is needed. * Back Cover: Use a layer height of 0.3 mm, with 2 perimeters (4 solid top layer) and 10% infill. No support material is required. * Filter: Use a layer height of 0.3 mm, with 15 perimeters (0 top and bottom solid layer) and 75% grid infill. No support material is needed. My Original Prusa i3 MK2 3D printer worked perfectly with this project. If you need to make any adjustments, a bit of sandpaper can help smooth out any rough edges.