Portable Stash Box UPDATED & IMPROVED

thingiverse

A compact container designed to hold up to three packs of king-sized rolling papers, a standard Clipper lighter, and a packet of roach cards. NEW VERSION INSTRUCTIONS Improved design features an additional storage compartment and consists of only two parts. - No supports required - Can be printed at any layer height (0.2mm for the lid and 0.3mm for the main body) - Includes holes for optional 4x2mm magnets - Recommended printing settings: three walls, three top layers, three bottom layers for both parts; 50% infill for the lid and 35% infill for the main body OLD VERSION INSTRUCTIONS: Top and Bottom Pieces Printed at 0.2mm layer height and 20% infill. Smaller Pieces Printed at 0.1mm layer height and 100% infill. All parts fit together via friction fit, no glue or bolts required (although they can be used). The dimensions work well on my Ender 3 machine, but success may vary depending on your printer's tolerances. The connecting pins are simple to model if you need to make adjustments. Some holes may require filling and sanding for a perfect fit. The box stays shut with the addition of four 2mm neodymium magnets (X4). You'll need to print two Dual Loop Hinges, two Single Loop Hinges, two long hinge pins, four short hinge pins, two Lid Hinge Pins, and the top and bottom parts. Tips: - When printing hinges, supports should not be needed inside the loops, but supports touching the build plate are recommended. - Use pliers to attach hinge pins by compression. - Print all cylindrical hinge pins separately for better results. - Avoid using supports for main parts and print them facing up. - Enjoy making this project, and please share your progress if you decide to create it!