Portable Monitor VESA Mount / QQH Monitor Cradle

prusaprinters

<p>This is an adjustable freestanding mount for portable monitors that have VESA mounting holes on the back. It's is a work in progress, can be adjusted left and right, up and down, but not vertically. I had planned to have it clamp to the edge of a counter but instead designed a base for it so it is freestanding. It's very stable.&nbsp;</p><p>I printed the base out of PETG (with taller layer height and 0.6 nozzle for aesthetic effect) and the other parts out of PLA+, over the months the riser has sagged slightly, perhaps another filament like ASA would be more suitable but it doesn't really matter what filament you use. Each part can be printed without any supports, the coupler part is the only one that will have some overhang issues but no supports needed.</p><p>The base barely fits on MK2/3 bed, make sure to turn off the default skirt in Prusa Slicer or it you will have a toolpath outside print area error.&nbsp;</p><p>You will need two M6 bolts and nuts for the coupler and four M4 bolts for the VESA mount.</p><p><strong>UPDATE:</strong> I've added the files for an alternate monitor stand I designed for the QQH brand portable monitor available on Amazon, no VESA holes on this monitor so it's a cradle. This stand also uses a 1 inch OD steel tube for the riser which allows for up/down and left/right adjustment and no sag over time. All the bolts/nuts are M5 except for the hinge which is an M6, don't recall the lengths, may update later. The cradle is split up into 3 pieces to fit on the MK2/3 bed, you may need to turn off the default perimeter skirt to make them fit.</p><p><a href="https://www.amazon.com/Portable-QQH-Computer-Speakers-External/dp/B09Y1ZST8V">https://www.amazon.com/Portable-QQH-Computer-Speakers-External/dp/B09Y1ZST8V</a></p>