Popper lure with printing base

thingiverse

I'm having trouble securing the original print to the bed, so I add a base for printing stability which will need trimming when finished. I also open the hole down the center for slightly larger wire. (0.50 x 8 inches) Please don't forget to tip if you can, thank you in advance! Note: This popper is 1.5 inches wide x 7.0625 inches long. (The file name is my version, not size!) Top and bottom print setting/concentric. I use PLA with a 40% honeycomb infill, 2/0 hooks, and hardware which weigh 2.33 ounces or 66 grams. I add 5/8-inch openings for eyes to be attached. I add grommet holes for the front, bottom, and tail! Popper_1.5x7.3.stl has small holes for screw-in eyebolts for hooks. Popper_1.5x7.4.stl has a hole for a swivel to loop the true wire. Popper 9.stl is the latest version with provision for grommets and a small indentation to keep the through wire locked.