PopCorn V1.0

thingiverse

I'm printing a 3D printer of about 200x200 inches with a diamond head. The entire thing is built from aluminum profiles and the maximum number of printed parts for all connections. The project is currently under assembly, so some parts may change. Edit on March 9, 2017: Added left cart Edit on March 28, 2017: Added NEMA Z supports Edit on March 29, 2017: Added NEMA Y supports (and Y bearing support in the same file) Edit on April 14, 2017: Modified head for belt passage Edit on April 15, 2017: Added pulley Edit on April 18, 2017: Modified head for belt passage and blTouch holding Shopping list (as of March 28, 2017): Achats: 4 aluminum profiles 20x60 L-Type with 5L groove: $400 8 aluminum profiles 20x20 L-Type with 5L groove: $400 6 D8 bars: $407 4 linear bearings 8mm 12 Arbor supports - bridge D:8 2 Arbor supports - bearing D:8 4 LM8UU (Z axis) 2 trapezoidal rods D:8 L: 400 (+bolt) 2 5/8 mm couplers Printed parts (printed, tested and validated): 4 x Raccord_5L-20-20-20.stl 4 x Renfort_5L-20-60-20.stl 4 x Raccord_5L-60-60-20.stl 4 x Renfort_5L-60-60-20.stl 1 x Porte_moteur_tete_1.stl 1 x Porte_moteur_tete_2.stl 1 x Porte_tete_1_supports.stl 1 x Porte_tete_2.stl 2 x Poulie.stl