Pop Socket Compatible Phone Stand

thingiverse

This is a PopSocket compatible phone stand. Couldn't find one that I liked so I made one for my wife and me. Assuming that the PopSocket is placed somewhere in the middle of the phone it should hold the phone in both landscape and portrait orientation (there is wiggle room, see the pictures). Print on its side with supports. I've printed in both PLA and PETG and both came out well. PLA works just as well as PETG in this application. It should fit phones with cases, assuming your case isn't huge (the thickness of phones it can accommodate is up to 12mm). For reference an iPhone 12 and a Galaxy S10 are about 8mm thick without a case. **FILES:** **Pop Socket Phone Stand with Cat.STL** - This one is the one that you see in the pictures. It's the same as the standard one but has a cut out of a cat's head on the back. **Pop Socket Phone Stand.STL** - Don't have a picture of this one, but it's the same as you see in the picture but instead of a cat it just has a rectangle cutout. This is for those that don't like cats for whatever weird reason.