PONYO SUN CATCHER

prusaprinters

<p>My daughter is into her Anime, I've been working on sun catchers of late. So ... here's Ponyo.</p> <p>This is a sun catcher printed without fancy multi-material mechanisms.</p> <p>The frame acts like the lead in a stained glass window. It needs to be printed in transparent filament with a change to black at the layer where the lead lines would be.</p> <p>Once completed, the coloured pieces are then glued into the relevant "gaps" in the frame. I used PVA glue and allowed it to set over a number of days.</p> <p>The tolerances are really tight, so you may need to sand the parts down a little to make them fit depending on your printers tolerances.</p> <h3>Print instructions</h3><h3>Category: 2D Art Print Settings</h3> <p><strong>Printer Brand:</strong> Prusa</p> <p><strong>Printer:</strong> <a href="http://amzn.to/2rqZ6Uo">i3 MK3</a></p> <p><strong>Rafts:</strong> No</p> <p><strong>Supports:</strong> No</p> <p><strong>Resolution:</strong> 0.1mm</p> <p><strong>Filament:</strong> n/a PLA / PET<br/> <strong>Notes:</strong></p> <p>It needs to be printed in transparent filament with a change to black at the layer where the lead lines would be.</p> <p>Smaller parts may need a brim.</p> <p>Care must be taken when removing from the print bed as they are between 0.5mm and 1.0mm thick.</p>