Pond Racer 700mm

cults3d

Discounted version available here: https://www.rc3dmarket.com/pond-racer-pr1-700mm-lw-pla A scale replica of Burt Ruhtan’s Pond Racer is designed for quick and easy construction and printed using light weight PLA (LW-PLA). For best results the canopy should be printed with clear PLA. Semi scale propellers are included in the plans designed to suit the 2205 2300kv outrunner (6.75x5 blade) in 2 blade configuration. Utilising full 4 channel controls; aileron, elevator, rudder and throttle, this model performs extremely well given its small size and lightweight. Links to components used can be found on the last page of the user guide. Included with this file: Factory files for Simplify 3d STL files for all components G-CODE for all files CURA profiles for LW-PLA and Regular PLA Detailed assembly manual and user guide TEST FILES available here: https://cults3d.com/en/3d-model/various/pond-racer-700mm-test-files flight video: https://www.youtube.com/watch?v=8D4kuGBfkNM&t=8s GENERAL SPECIFICATIONS WINGSPAN: 700mm PRINT WEIGHT: 200g FLYING WEIGHT: 498g CENTER OF GRAVITY 10mm aft of L.E at wing root. (Marked with indentation) ELECTRICS MOTOR: x2 2205 2300KV (1 CW and 1 CCW) ESC: x2 12amp (min) 20amp (recommended) SERVOS: x4 3.7g MICRO BATTERY: x2 950MAH 2S (45gram or similar) REQUIRED COMPONENTS: X2 2205 2300KV MOTOR (or similar) X2 12AMP or 20AMP ESC X2 950MAH 2S LIPO OR SIMILAR X4 3.7G MICRO SERVO BAMBOO SKEWERS 3MM HEAT SHRINK TUBE 3mm X6 10mm X 10mm X 2mm MAGNET (ROUND) X10 MICRO HINGES (OPTIONAL) VELCRO X2 x 500mm CARBON STRIP 3mm x 0.6mm (OPTIONAL) M2 x10mm SCREWS 1mm PIANO WIRE