Polybar Remix Kailh Box Switches

thingiverse

Remix of roadsidebomb's Polybar to use Kailh Box switches instead of the lower profile Cherry MX switches used in the original. Print all other parts from the original. Kailh Box switches have a lot more options for sounds and feel. I used Kailh Box Royal for the fret switches and Kailh Box Navy for the strum bar. Another good option is Kailh Box Heavy Burnt Orange if you don't want the click sound. You might have to lightly file the button post depending on your printer's tolerances to fit them inside the switch stem without causing it to bulge and hang up the switch. It should fit tight but not overly tight. I shortened the fret buttons by .25mm to make it easier to slide across the frets but included the original size as well. When attaching the fret buttons to the switches, there's slightly more play with the switch and button, pop the switch out of the fret board, push the fret button onto the stem, push the switch back into the fret board and and use some small pliers to pull the post on the back of the switch to seat it in the fret board. Fret board goes with the protruding rails facing up between the board and the fret buttons. Printed at .20mm on a .4mm nozzle in PETG and PLA at 20% - 40% infill.