Polestar 2 bottle holder for the front doors
cults3d
I was missing a proper bottle holder in the front door of the Polestar 2, so i made these. One design for each door. They have an inner diameter of 85mm and a depth of 120mm (125mm in the center). Print with support only for the bracket. You need 2 bolts per bottle holder. I used tesa 51608 PET Fleece Fabric Tape for the inside of the bracket to protect the door panel against scratches. Installation: 1. Screw in the screws, but only a few turns. 2. It is necessary to push the holder near the middle on the door panel and then adjust it, while the door is closed. The position depends on your setup of the seat. Remember that, if your car is used by more than one driver. 3. Don't turn the screws too far, because the bracket may crack. Didn't happen to me so far.
With this file you will be able to print Polestar 2 bottle holder for the front doors with your 3D printer. Click on the button and save the file on your computer to work, edit or customize your design. You can also find more 3D designs for printers on Polestar 2 bottle holder for the front doors.