Pole/wall mount for 1.5" Fibropool diverter valve.

prusaprinters

This mounts Fibropool 1.5" NPT 3-way diverter valve to a 4x4 pole or to a wall. I am not affiliated with Fibropool or Amazon, I just bought this valve to split pump output off to my water slide and found it very awkward, no way to cleanly mount it, so I made this; hopefully it helps someone else. Screws attach the mount to the wall and zip ties attach the valve to the mount. The 4 outside holes are for #8, #9, or #10 deck screws. The 4 inside holes (with channels between them on the back) are for heavy duty zip ties. The zip ties can be installed after the mount is already attached; Just bend the ends of the zip ties inward a little bit and they can be inserted from the front, they will follow the channel along the back, and pop back out the front out of a different hole. If installing outdoors use black zip ties, they are UV resistant; white ones aren't. I printed out of Polymaker Polylite PC but you can use whatever (again consider UV resistance for outdoor installation).