Polaris Genesis Injected aftermarket TPS adapter

thingiverse

Summary This allows for a non-OEM TPS (Throttle Position Sensor) to be used on the fuel injected Polaris Genesis i 1200cc watercraft. Pretty sure it also will apply to the MSX140 and Virage models of similar build. I found a TPS that would work, but needed to be adapted for this application. For the TPS, I used Standard Motor Products TH18 Throttle Position Sensor, from amazon https://www.amazon.com/dp/B000C83Y9Y?psc=1&ref=ppx_yo2ov_dt_b_product_details I used this for the harness adapter - cut off the one that came with the TPS, and put this one on instead - https://www.amazon.com/dp/B076H88TYJ?ref=ppx_yo2ov_dt_b_product_details&th=1 Then just print the attached stl files, the 'B' version is slightly different length.. see what works for you. Line up the splines so that the TPS engages just as the throttle does, then check to make sure it operates properly throughout the throttle motion. Might have to play with it to get it just right. I ran about 30 Gallons through the ski and it ran great Print Settings Resolution: .4 nozzle Infill: 10 lines 50% infill Filament brand: whatever you trust Filament material: ABS, PLA might work