Pokemon Card Stands

prusaprinters

<p>These models were designed to display Pokémon cards. The card in the stand is tilted back slightly and the area in front of the card is meant for displaying a 3D representation of the Pokemon. It is not directly in front of the card to not obstruct view of it. You can have a look at our Low Poly Pokémon collection if you’d like some models to with it: https://3d-mon.com/3d-model/groupe/unisex3dprintmodel/pokemon/</p><p>The black layers on the top which help separate the Pokémon with contrast are done using a color change in the slicer as described below.</p><p>The stands have Pokémon energy types stamped into them but there is also a blank version that doesn’t have any symbol on it. Energy types: Fire, Water, Lightning, Fighting, Psychic, Colorless, Darkness, Metal, Dragon and Fairy</p><p><strong>Size</strong><br>There are two size versions of holes for the cards. One for 3" X 4" Toploaders and the other is for PSA cases which are bigger.&nbsp;<br>At 100% scale the model’s&nbsp;dimensions are approximately:<br>Width 206&nbsp;mm<br>Length 102&nbsp;mm<br>Height 8&nbsp;mm<br>Can be turned diagonally to fit 170 mm print beds.<br><br><strong>3D printing settings</strong> we used:<br>Layer height 0.2 mm<br>No Supports</p><p>0 bottom layers<br>Infill 9% Triangles (because of the low infill we set a single solid layer to print on the layer where the type symbol starts printing because it wasn’t bridging it well enough.</p><p>Color change:<br>To change the color for the top black layers you can use PrusaSlicers color change function or you can open any g-code in a text editor and add the code M600 before the layer where you want the change to occur. Top 2 layers should be black to ensure even coverage.</p><p>If you want the top solid infill to be aligned with the edges then set it to a 46.6° angle.</p><p>If you have a spotless printing surface you might want to print the stand upside down and have a glossy finish (the type symbol will bridge easily without supports).<br>Printing settings will vary greatly depending on your specific printer.</p><p>The single color stands were printed with Fillamentum PLA and the rainbow version was printed with Sunlu Rainbow Silk PLA.<br><br>Do you like the model and don't have a 3D printer? There are lots of people who offer 3D printing services these days. Try searching for someone who offers them in your area.<br>&nbsp;</p><p><br>This fan-made model was brought to life by Filip from 3Demon. We are a group of modeling and 3d printing enthusiasts based in Prague, Czech Republic. We’ve been making 3D printable models for more than a decade. We make a lot of cosplay accessories but we also make all sorts of interesting 3D models. You can join our community or just look at more of our creations here: https://3d-mon.com/links/</p>