Pokeball Cherish Ball

prusaprinters

A Cherish Ball, based on my original pokeball model. This model is listed as a remix because due to the new ring geometry and alignment pin locations, these lid and ring parts are not compatible with the originals.Misc. Info:The print-in-place ring mechanism has two versions with different tolerances. Make sure your elephants foot compensation is set properly to prevent the hinge from seizing.The loose (original) version has a minimum gap size of 0.3mm, and should work with most printersThe tight version has a minimum gap size of 0.2mm, and should only be printed if you are confident with your printer's capabilitiesThe magnets I used measure 6mm x 1.75mm (6x2 nominal). I got them from amazon: https://www.amazon.com/gp/product/B07KJ9H31PPrintable alignment pins are included, but you can use machined pins tooThis model will need some painting or multi-material printing to add full colorAssembly Instructions: Refer to https://www.printables.com/model/687259-pokeball