Pointy Haired Boss

myminifactory

The Pointy Haired Boss: A Fountain of Wisdom to Avoid at All Costs In the iconic comic strip Dilbert, the Pointy Haired Boss is a symbol of questionable wisdom that you should steer clear of at all costs. If you have the right filament colors, you can avoid painting altogether. This 3D model stands at an impressive 200mm tall after assembly and is in perfect proportion to the previously posted Dilbert model. Enjoy! Print Settings: Printer: FlashForge Creator X Rafts: No Supports: No Resolution: .2mm Infill: 10% Tips for Preparing the Model for Assembly Building the Model Colors (no multiple printed pieces required) The following colors were used: Beige/Skin: boss_head, boss_hand_right, boss_hand_left Black: boss_shoe_right, boss_shoe_left, boss_hair, boss_tie_a, boss_tie_c, boss_tie_e, boss_tie_g, boss_eye_left, boss_eye_right Blue: boss_jacket, boss_arm_left, boss_arm_right, boss_pants, boss_tie_b, boss_tie_d, boss_tie_f White: boss_shirt, boss_sleeve_right, boss_sleeve_left Printing and Assembly Tips Printing Tips: 1. Make sure the first layer squish is completely cleaned off any piece that may seem not to fit. 2. Use a small hole through all tie pieces to help position them while gluing. Assembly Tips: The diagram below will help in assembling the model. Glue all parts together carefully, ensuring a snug fit. Clean the first layer of the shirt thoroughly before snapping it into place. Socks should be glued into shoes and fit almost fully inside the jacket. Eyebrows and eyes are small; use the holes as a placement guide only.