Pod realacc X210 new design

thingiverse

Update June 01: Added a new version with and without an XT60 mount on the back and one without, giving better esc protection. Infill 60% works best for me. Supports are advised, don't need a lot. I changed the rear slightly; the antenna mount is moved 4mm further to the rear and made more vertical, also raised the rear by 5mm. This gives a bit more space but the inside space is still less than the old one. By the arms, I added a bottom part: as you use a 4 in 1 esc, leave it there and mount the arms over the wires; as you use an esc on the arm, remove the inner one or cut it open. Latest update: Stretched is finished, -30deg HD mount version is added to this X210 new. Working on: New version. X210 pro version is in the making. Please give feedback! New version! After some comments, I made some changes: The esc protectors are now 1mm thick and 2.5mm raised, giving bigger esc's more space. Added an extra zip tie hole on the inner side. Front length changed; the length of the mid cam mounting hole till the front of the opening is now 28.25mm. Side of the fpv cam ridge that sits there is made a bit bigger to make it a bit more stiff. Front by the bottom plate follows the line better, not only optical but also makes it a bit stronger. VTX antenna mount moved 8mm to the front and angle is 10 degrees more up; this is done so short antenna's won't hit the props. Please let me know if the updates improved it and if there are other things. The more feedback I get, the faster I can finish the pod and improve it. Holes are still not there and can be made by using a sharp knife or soldering iron; I did not add them because I still work on the pod. As everything is ok, I will add them with also the step files so you can add your own openings. I hope to add a cam mount version later tonight; this will be a 30-degree cam mount. Other versions will follow. The version with the lock nuts is not there yet; I changed this version and as this is ready, the other version will come back. Other news for X210 pro users: I am working on an x210 pro version; it will get its own thingverse number but I want to let you know that I am working on it. Stretched X version will follow as both pods are ready. I will design a bottom plate that fits the pod and follows the flow; I make my own bottom plate so I can make it better fit and decide where I want the mounting holes. Follow me on instagram if you want to know what's coming: https://www.instagram.com/emiel1976/ How I Designed This Program used This pod is made with fusion 360.