Pocket door handle

prusaprinters

<p>Pocket door handle</p> <p>This will fit a pocket door with a 74x43x34mm opening</p> <p>You will need to drill a 12.7mm hole in the door jamb so the button fits in.</p> <p>Hardware required:<br/> 2x 16mm m3 socket head screw<br/> 2x m3 square nut</p> <h3>Print instructions</h3><p>I used supports form build plate only and oriented the part so the non visible portion of the nut and screw side were on the bed.</p> <p>For the middle portion it is best to use a brim and print the long side vertically. This way you will have support only under the knob.</p> <p>Printed at 0.2mm</p>