PM full kit chain cable management Tevo Tornado

thingiverse

Hello, I'm gathering all the necessary parts in this thing to create a complete cable management system like the CNs. This kit is for the original Tevo Tornado. Don't hesitate to check out the details of each element with the links at the bottom of the page. There are personal kits and elements for modified Tornados (like the black fan extruder kit in the photos). You'll need to modify the case to get the cables out on the side. The Y cable plug goes to the AR below the fan, while the XZ cable plug goes to the AV of the fan. Permanent wires go up from the fan towards the CN board (see photo). Drill at Ø 15 for the plugs and Ø 10.5 or 11 for the tube. To assemble the kit, you'll need to print: 1. Base Z 2. Base XZ 3. Base Y 4. Base bed 5. Fan start link (for X) 6. Y end link 7. High B 40° link 8. 37 high B links 9. 23 low B links 10. 11 low 5° links For the Y, start with the Y end link on the Base Y and build up alternately with one high B link and one low B link. You'll need a total of 19 links plus the end link, with 10 high B links and 9 low B links. For the X, start with one high B link facing upwards on the Base XZ, then add one high link facing downwards. Continue building up alternately. Then attach the high B 40° link to the fan start link. You'll need a total of 24 links, including 13 high B links and 11 low 5° links. For the Z, start with the Base XZ with one inverted high link. Then add alternating low B links and high B links on three links (PM towards AR). Do the same on seven more links but PM towards AV (see photo). Start with a low B link and then invert again on eight more links (PM towards AR) starting with a high link. Invert again on eight more links (PM towards AV) starting with a high link. Finally, invert the last low B link to connect it to AR. For the base bed, insert it into the vis before the spring on the plate side. For the XZ base, insert it onto the threaded female rod that holds the X support block. That's it, it's assembled! The elements in detail and optional kits: https://www.thingiverse.com/thing:2862459 https://www.thingiverse.com/thing:2853423 https://www.thingiverse.com/thing:2843435 https://www.thingiverse.com/thing:2836418 Optional: https://www.thingiverse.com/thing:2855341 (XZ base for Tevo with Silent block for Nema 17) https://www.thingiverse.com/thing:2849465 (Fan extruder and nozzle) Upgrade XZ V2: https://www.thingiverse.com/thing:3315211 Update with a long link for the Y start plate