Playstation 4 Camera (v2) mount (for PSVR)

thingiverse

I had trouble getting a good distance and height for my PS Camera when using it with my PSVR, so I bought the cheapest floor lamp at IKEA* and designed this mount for it (which clamps around the rod). I don't use the lamp part/lampshade; instead, the base and the rod act like a stand for the camera. I also designed a cable clip for attaching the camera cable to the rod. This way, I can easily adjust the position, distance, and height. *The floor lamp is called NOT and cost about ~$8 http://www.ikea.com/us/en/catalog/products/10139879/ Needed: Exacto knife Wet sandpaper (1000 grit) 2 x M4 bolts and wing nuts EDIT: Added a link to the floor lamp, thank you tgraves226! Print Settings Printer: Wanhao Duplicator i3 Rafts: Yes Supports: No Resolution: 0.2 Infill: 40% (100% for the cable clip) Notes: | Filament: Flashforge PLA | Shell thickness: 1.2mm | Bottom/top thickness: 1mm | Print speed: 50mm/s | Printing temp: 210C | Bed temp: 60C | Slicer: Cura (15.04.6) | Print time (total): ~2.5h in total | Post-Printing Mount: Trim the edges, mount to rod using two M4 bolts and wing nuts/regular nuts. Cable clip: Trim the edges, attach to cable and then clip it on to the rod.