Playseat Challenge Fanatec Pedals v3's Mount

prusaprinters

<p>I needed something to mount Fanatec V3s pedals on Playseat Challenge, so I came up with this design.</p> <p>I've printed this in PLA, but you could go with PETG for strength</p> <p>There are 2 variants, one for M8 bolt since v3's has 8,5mm holes for mounting and smaller M6 because of COVID-19 no hardware stores are working and I had no M8 at home.</p> <p>You need 4 sets of mounts for one Playseat Challange.</p> <p>!You need to cut the foam to fit this mod!</p> <p>Holes that Playseat pedal stand it going trough are slightly larger to accommodate TPU pad for better grip. The attached TPU_pad is 0.25mm and I have printed it in 2 layers but depending on your printer you will need to adjust the hight of the pad. I also have tried 0,15mm and 0,30mm but they were not a perfect fit. You can quickly make one in Thinkercad with a dimension of 62x39mm and your hight.</p> <p>Hardware:</p> <p>M6 x 40mm - 4pcz</p> <p>or</p> <p>M8 x 40mm - 4pcz</p> <p>M3 x 30 mm - 16pcz</p> <p>And nut for every screw</p> <h3>Print Settings</h3> <p><strong>Printer Brand:</strong></p> <p>Creality</p> <p class="detail-setting printer"><strong>Printer: </strong> <div><p>Ender 3</p></div> <p><strong>Resolution:</strong></p> <p>0.2</p> <p class="detail-setting infill"><strong>Infill: </strong> <div><p>50-60%</p></div> <p><strong>Filament:</strong> DEVIL DESIGN PLA or PETG Black</p> <p><br/> <p class="detail-setting notes"><strong>Notes: </strong></p> </p><div><p>I've printed PLA with 6 walls all-round.</p></div> </p></p> Category: Video Games