PLATE FOR THE INSTALLATION OF HINGES SALICE FOR TEMPLATE ASSIST

cults3d

This reversible plate is used with ASSISTENT brand jigs and accessories. This is a specific adaptation to make the holes for SALICE hinges: The Hinge side: 21.5mm offset to point the 35mm hole. With the 21.5 Adjustment Pin Center distance 48 for the hinge Offset 6mm / 35mm centerline for mounting holes Baseplate side: 32mm center distance for the baseplate at 37mm from the edge. Also suitable for 19mm thick flush doors ( Distance 56mm). It is necessary to use the GABARIT MIX-P base or the GABARIT STD which normally comes with a 600 mm perforated rule. The holes are made with the 12mm guide and the 5mm diameter drill bit. and the pointing of the 35mm hole is done with the punch that fits on the drill guide. Attention: the STL only concerns the plate with the centering holes. For any help or need of advice to print this object, please feel free to contact me.