Planetary Gearbox

Planetary Gearbox

thingiverse

This is a 4:1 stackable planetary gearbox that can be used standalone or paired with this generator https://www.thingiverse.com/thing:5374490 ---------------------------------- # parts list: ---------------------------------- 1x 625-2RS Bearing (I.D.=5mm, O.D.=16mm, Thickness=5mm): https://a.co/d/h9cimVq 4x 683ZZ (Inner Dia.=3mm, Outer Dia.=7mm, Thickness=3mm): https://a.co/d/5DVNWvr 1x 6806-2RS (I.D.=30mm, O.D.=42mm, Thickness=7mm): https://a.co/d/gco2hUg 8x nuts - M3 (plus another 4x if you want to be able to stack another gearbox on top) 4x socket cap screws M3x14 up to M3x20 (plus another 4x if you want to stack to another gearbox) 4x socket cap screws M3x10 ---------------------------------- # 3D printing steps: ---------------------------------- all parts were printed with PLA filament using a Prusa MK3S at 0.2mm layer height ## CASE **planetary_gearbox_-_case_lid.stl**: printed no supports required 0.2mm layer height **planetary_gearbox_-_case_bottom.stl**: printed no supports required 0.2mm layer height ## PLANETARY CARRIER AND GEARS **planetary_gearbox_-_planet_carrier.stl**: requires supports, 0.2mm layer height **planetary_gearbox_-_sun_gear.stl**: printed no supports required 0.2mm layer **4x planetary_gearbox_-_planet_gear.stl**: printed no supports required 0.2mm layer (depending on accuracy of your printer and filament, you might need to scale to 99% or less) ---------------------------------- # Assembly Instructions: ---------------------------------- ## NUTS - 4 nuts fit snuggly into side of planet carrier - 4 nuts fit into case bottom - 4 nuts fit into case lid ## PLANET CARRIER - each of the 683ZZ bearings fit snuggly into each of the planet gears. Then the m3x10 screw connects the planet gears to the carrier and should rotate easily (dont over tighten) - the 6806-2RS bearing fits over the top side of the carrier - the 625-2RS bearing fits under the carrier and the sun gear fits snuggly in, there are no fasteners for the sun gear ## FINAL ASSEMBLY 1. The M14-M20 screws attach the lid to the base in every other hole. The other holes are to attach a second carrier

Download Model from thingiverse

With this file you will be able to print Planetary Gearbox with your 3D printer. Click on the button and save the file on your computer to work, edit or customize your design. You can also find more 3D designs for printers on Planetary Gearbox.